The V-Press 610 reduces the volume of cardboard or foils in an economical way. Highly compressed bales can already be marketed without requiring any further pressing. The Eco 610 is suitable for mid-size super markets & retails stores.
The Eco 610 comes with double door with hand wheel door lock. It has low installation height and surface. The special retaining claws optimize the compression of the pressing material, increasing both the loading volume and bale output. It has quick and easy press assembly. Eco 610 is equipped with mechanical bale ejector. It is equipped with HSM TCS (Torsion Control System) for monitoring press ram movement. Bale strapping is to be done with polyester tape.
Pressing power | 120 kN |
Specific pressing power | 25 N/cm² |
Driving power | 3 kW |
Voltage / Frequency | 400 V / 50 Hz |
Cycle time when idling | 22 s |
Loading aperture width x height | 800 x 495 mm |
Bale length from to x Bale width x Bale height | 800 x 600 x 600 mm |
Bale weight | 100 Kg Approx |
Machine Width x Depth x Height | 1198 x 823 x 1986 mm |
Machine Weight | 540 Kgs |
Method of strapping | Vertical |
Number of strappings | 3 |
Type of consumables | Strapping tape |
Industry type | Logistics & Distribution, Manufacturing, Print & Packaging |
Easy to handle thanks to counter-rotating thread for quick opening and closing.
(Torsion Control System) for monitoring press ram movement
Automatic start of the pressing process after closing the door
Convenient membrane keypad with text display, which shows the current status of the machine
Special retaining claws optimize the compression of the pressing material and reduce the number of loading actions
Suitable for cardboard as well as film
Bale strapping with polyester tape
All of our products is covered with 1 Year Warranty against manufacturing defects.
Yes HSM balers are safe & designed to be operated with minimal effort. Easy to use and very high safety standards. We provide operator training at the time of machine installation on customer request.
HSM balers are designed for baling Cardboard (OCC), Paper, Tissue, and Plastic Films.
The POWER BEAR team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile