With a maximum bale weight of 550 kg, strong pressing power and an absolutely high efficiency level, the HSM V-Press 1160 is the top-model of the HSM V-Press series. Rapid stroke technology saves time and money. These are known as Mill Size Balers and due to their uniformity in bale density, they are more efficient to transport. V Press 1160 is largely suitable for paper recycling plants, OCC traders. medium manufacturing paper and cardboard units.
V Press 1160’s rapid stroke technology saves time and money. The V press 1160 is equipped with hand wheel door lock which make it easy to handle opening and closing of the doors. It has quick and easy installation due to crossed cylinders. Special feature of Auto start of the pressing process after closing the door. There is convenient membrane keypad with text display, which shows the current status of the machine. It is equipped with HSM TCS (Torsion Control System) for monitoring press ram movement. Suitable for cardboard as well as film. Bale strapping is done with polyester tape or Pre Looped wire.
|Specific pressing power
|Voltage / Frequency
|400 V / 50 Hz
|Cycle time when idling
|Loading aperture width x height
|1195 x 650 mm
|Bale length from to x Bale width x Bale height
|1200 x 1100 x 1200 mm
|Hourly Output in Balers
|1-2 bales Approx.
|550 Kg Approx.
|Machine Width x Depth x Height
|1780 x 1568 x 2985 mm
|1780 x 1568 x 2985 Kgs
|Method of strapping
|Number of strappings
Easy to handle thanks to counter-rotating thread for quick opening and closing.
(Torsion Control System) for monitoring press ram movement
Automatic start of the pressing process after closing the door
Convenient membrane keypad with text display, which shows the current status of the machine.
Suitable for cardboard as well as film
Rapid stroke technology saves time and money
Robust mechanical bale ejector chain.
Hydraulic door lock no manual effort required.
Double quantity of retaining claws optimize the compression of the pressing material.
The maximum bale weight is 550 kgs per bale.
Yes, strapping tape can be used, we have option to add strapping station which can be offered at an additional cost.
All of HSM V Press models has manually feeding for waste carton, films & papers.
The POWER BEAR team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile