The HSM HL 3521 S, with its exceptionally large loading aperture is the perfect machine for compressing large quantities of paper, cardboard, foils or packaging material and for extremely large and bulky materials. It also has been especially designed for compressing strongly expanding material such as foam.
The HL 3532 is low in height, has large loading aperture, also suitable for bulky material. The hydraulic loading flap is used for maximum operating comfort and for precompressing. Pre stored-program controller plc is available. The hydraulic counterplate for bale removal ensures optimum operating convenience and safety. Bale strapping is manual with wire (tape as option).
Pressing power | 320 kN |
Specific pressing power | 40 N/cm² |
Driving power | 22 kW |
Voltage / Frequency | 400 V / 50 Hz |
Cycle time when idling | 44 s |
Volume throughput in idle | 138 m³/h |
Loading aperture width x Length | 800 x 2100 mm |
Bale length from to x Bale width x Bale height | 800 x 1000 x 1200 mm |
Bale weight | 600 Kg approx. |
Machine Length x Width x Height | 7900 x 1660 x 2485 mm |
Machine Weight | 7100 Kgs |
Method of strapping | Horizontal |
Number of strappings | 6 |
Type of consumables | Strapping tape |
Low overall height suitable for bulky material.
Hydraulic loading flap for maximum operating comfort.
Stored-program controller PLC
Hydraulic counterplate for bale removal ensures optimum operating convenience
Manual bale strapping with wire (tape as option).
The maximum bale weight is 600 kgs per bale.
Plastic film, Cardboard Punch waste/residue, Big Bags, HDPE / LDPE hollow containers & plastic bottles, Polystyrene Mixed paper.
Loading is done manually.
The POWER BEAR team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile