An Ideal & very high performance & large fully automatic baler for larger industrial applications with high throughput rates - up to approx. 887 m³/h. Suitable for cardboard, plastic film and compressing DSD goods, UBC as well as PET bottles (other materials on request). Gimballed press cylinder system - Reduced wear on the pressing cylinder and press ram guides.
VK 12018 is suitable for cardboard, plastic film and compressing OCC & PET bottles. It is available as an option suitable for residual waste (with wear-resistant steel). There is an option available with frequency-regulated drive – saves 40 % of the energy used by standard drives. The solid press carriage guidance with easy maintenance access determining the bale length exactly, even in the case of frequently exchanged material. The optimally adjusted software for different materials guarantees high bale quality even when material is frequently changed. Best suitable for continuous feeding with a conveyor belt, air feeding. It has solid steel construction with highly wear & resistant steel parts inside the press chamber and press channel. The Gimballed press cylinder system - reduced wear on the pressing cylinder and press ram guides. It has 5-fold strapping for optimal bale result also with expansive materials.
Pressing power | 1200 kN |
Specific pressing power | 99,⁰ N/cm² |
Driving power | 45+45 kW frequency-controlled |
Voltage / Frequency | 400 V / 50 Hz |
Cycle time when idling | 10 s |
Loading aperture width x Length | 970 x 1800 mm |
Bale width x Bale height x Bale length: | 1100 x 1100 x 600-2000 mm |
Volume throughput in idle operation (theoretical.): | 786 m³/h |
Volume throughput at 50kg/m³ (theoretical.) | 39.3 t/h |
Bale weight | 700-1100 Kg approx. |
Length x Width x Height: | 12700 x 4160 x 3910 mm |
Machine Weight | 38 t |
Method of strapping | Horizontal |
Number of strappings | 5 |
Cardboard, plastic film and compressing DSD goods, UBC as well as PET bottles
Suitable for residual waste (with wear-resistant steel)
Frequency-regulated drive – saves 40 % of the energy used by standard drives.
Solid press carriage guidance with easy maintenance access.
Determining the bale length exactly, even in the case of frequently exchanged material
Key-operated inspection door safety lock system (Castle-lock) for highest level of operator safety
Programmable Siemens logic controller with touch panel
Continuous feeding with a conveyor belt, air feeding
Gimballed press cylinder system - Reduced wear on the pressing cylinder and press ram guides
5-fold strapping for optimal bale result also with expansive materials
All of our products is covered with 1 Year Warranty against manufacturing defects.
Yes HSM balers are safe & designed to be operated with minimal effort. Easy to use and very high safety standards. We provide operator training at the time of machine installation on customer request.
HDPE / LDPE hollow containers & plastic bottles, Big Bags, Punch waste/residue, Cardboard, Mixed paper, Plastic film.
The POWER BEAR team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile