Mobile compactor for chain loader systems is produced according to DIN 30 730 or local standard. These are high performance HORIZONTAL RAM self-contained compactors; it has a smooth line construction in conical shape for easy discharge at landfill. Also available with an option of sludge tank to empty the sticky liquid waste either at garbage room/site or at the landfill. Available with integrated bin lifter or with detachable mobile bin lifter as special request. Customer can choose suiting standard RAL color choice
It has safe filling options which avoids accidents. Designed for any truck system. With standard feeder/hopper size. It is standard RAM pressing power. Optional hydraulic bin lift units. Safety tailgate locking device with threaded ratchet (easy opening under pressure) Cone-shaped funnel mounted with protected controls for a longer service life. Trouble-free electrical installation. Oil sight glass checkable from outside. Oil drain plug with tap moved to the outside.
|16 A delay
|400v / 50Hz
|Upper feed opening
|120 x 1500 mm
|Lower feed opening
|835 x 1360 mm
|Ram capacity / stroke
|28kN / m2
Dry waste compactors are compactors to handle recyclables/inorganic waste/ packaging waste etc., whereas wet waste compactors are more suitable for handling organic /food waste/ municipal solid waste in commercial and residential areas.
Before making a decision on what type and capacity of compactor should be employed, please check and verify that truck can access the location where portable compactor is placed, please reach us and we shall offer assistance in selecting right model and capacity
A conservative compaction ratio can be considered as 1:4 however, depending upon type of waste compaction ratio may vary, for example fruit carton has a lower ratio than a watermelon. Yes, compactor needs to be cleaned for better hygiene reasons and to avoid troublesome odours.
The POWER BEAR team will advice you about the most practical delivery option to your address.
Can deliver up to 2 pcs
can deliver up to 4 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile