The OG25 can aerobically process an average of 11 Kgs of food waste per hour. This is best suited for restaurants, fast food joints and bakeries. Since an ORCA can digest most things that a human body can by itself, it is very capable of digesting cooked food, fruits, vegetables, and various kinds of meat without a hint of hesitation.
The OG25 can aerobically process an average of 11 Kgs of food waste per hour. This is best suited for restaurants, fast food joints and bakeries. Since an ORCA can digest most things that a human body can by itself, it is very capable of digesting cooked food, fruits, vegetables, and various kinds of meat without a hint of hesitation. The OG25 is 50″ long, 35″ wide, and 49″ tall and comes fully equipped with the ORCA Biochips along with the proprietary microorganism solution. It weighs a little over 360 Kgs when its empty. The ORCA OG25s can divert close to 110 tons of food waste per year from the landfill.
| Required Supplies | ORCA Biochips, microorganisms & wipers |
| Weight Of Orca | 1000 lbs (454 kg) |
| Electrical Consumption | 1.2kwh |
| Dimensions | L 49.65" x W 33.75" x H 50.07" (L 126cm W 86cm x H 127 cm) |
| Hourly Processing Capacity | Average of 25 lbs (11 kg) per hour |
| Water Consumption |
114 gallons (430 liters) per day* *Calculated based on an incoming flow rate of 2 gallons (7.6 liters) per minute* |
| Installation Requirements |
Electrical - Dedicated 120V / 220V Electrical Cord Length - 36 - 48 inches (91 - 121cm) Water - Cold 1/2 inch (1.3cm) water connection Drain - Min. 2 inch (5.08cm) sanitary drain complete with grease interceptor Additional Space - A minimum of 24 inches (62cm) of free space must be available on both sides of the machine for maintenance |
How often and how much can I feed the ORCA OG25?The ORCA OG25 is capable of processing an average of 11 Kgs every hour, which brings it up to a grand total of 264 Kgs of digestible food waste every day.
Does the machine ever need to be turned off?No, ORCA is capable of working round the clock to consume food waste to achieve its full potential.
How long is the installation process?The installation process takes approximately a day or more as it includes transportation of the digester, setting up the food waste management space, scaling the ORCAs position, setting up the drainage and configuring the network connectivity.
The POWER BEAR team will advice you about the most practical delivery option to your address.
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile
