The OG15, also known as the Baby ORCA, can aerobically process an average of 7 Kgs of food waste per hour. It is particularly small and portable in such a way that it can even be fitted into food trucks and small shacks. Since an ORCA can digest most things that a human body can by itself, it is very capable of digesting both cooked food, fruits, vegetables, and various kinds of meat without a hint of hesitation.
The OG15, also known as the Baby ORCA, can aerobically process an average of 7 Kgs of food waste per hour. It is particularly small and portable in such a way that it can even be fitted into food trucks and small shacks. Since an ORCA can digest most things that a human body can by itself, it is very capable of digesting cooked food, fruits, vegetables, and various kinds of meat without a hint of hesitation. The Baby ORCA is 32″ long, 23″ wide, and 42.5″ tall and comes fully equipped with the ORCA Biochips along with the proprietary microorganism solution. It weighs close to 160 Kgs when its empty. Baby ORCAs can divert a little over 65 tons of food waste per year from the landfill.
| Required Supplies | ORCA Biochips, microorganisms & wipers |
| Weight Of Orca | 350 lbs (159 kg) |
| Electrical Usage | 0.43 kwh |
| Dimensions | L 31.89" x W 26.77" x H 45.52" (L 81cm x W 58cm x H 108cm) |
| Hourly Processing Capacity | Average of 15 lbs (7 kg) per hour |
| Water Consumption |
114 gallons (430 liters) per day* *Calculated based on an incoming flow rate of 2 gallons (7.6 liters) per minute* |
| Installation Requirements |
Electrical - Dedicated 120V / 220V Electrical Cord Length - 36 - 48 inches (91 - 121 cm) Water - Cold 1/2 inch water connection Drain - 2 inch sanitary drain complete with grease interceptor Additional Space - A minimum of 24 inches (62cm) of free space must be available on both sides of the machine |
How often and how much can I feed the ORCA?The ORCA OG15 is capable of processing an average of 7 Kgs every hour, which brings it up to a grand total of 168 Kgs of digestible food waste every day.
Does the machine ever need to be turned off?No, ORCA is capable of working round the clock to consume food waste to achieve its full potential.
How long is the installation process?The installation process takes approximately a day as it includes transportation of the digester, setting up the food waste management space, scaling the ORCAs position, setting up the drainage and configuring the network connectivity.
The POWER Bear team will advice you about the most practical delivery option to your address.
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile
